Novalac CF Caution For Usage

Preparation Instructions of Novalac CF Baby Formula: Place the milk bottle and its equipment that has been cleaned into water. Make sure the milk bottle and the equipment is completely sunk and no trapped air bubbles.
Cover the pot with a lid. Heat the water until boiling. Make sure the water does not boil until dry.
Wash hands with soap and water, and dry with clean cloth or kitchen paper (kitchen towel).
Read the directions on the formula label to find out the required amount of water and milk. Use of milk formula that is more or less than the instructions in the measurements on the label can make the baby sick.
Pour the boiling water to the right measure in milk bottles that have been cleaned and sterilized. Temperature of water for the preparation of formula milk is no less than 70°C. For preparation at home, the temperature can be determined by letting the water that has been boiled at room temperature for no more than 30 minutes. If using a thermometer, use a thermometer with clean and sterile mercury. Watch out to prevent burns from occurring. *Water temperature will vary depending on the method the preparation of each formula milk.
Add formula milk in the right amount with the provided scoop. Shake the milk bottle to make sure the milk and water are mixed perfectly.
Lower the temperature of the milk by holding the milk bottle under running tap water, or put it in a container of cold water or ice. To avoid milk mixture from being contaminated, make sure the water level to cool the milk mixture is below milk bottle cap level.
Check the temperature of the milk by dripping a little on the wrist. Milk should be warm and not hot. If the milk is still hot, cool it again before giving it to the baby.
Discard excess milk or milk that has been exposed to air for more than two hours.